EVERYTHING ABOUT THE ELECTRIC NAIL FILE

All about the electric nail file

The electric nail file was created to make it easier for you at home or in the salon to create beautiful nails.

The electric nail file can be used throughout the process, from prepping the natural nail, filing the nail, and removal. It's all about having the right bit and the right speed.

An electric nail file is usually equipped with a motor, a handpiece, and mechanics that allow speed adjustment. On the handpiece, various bits can be inserted at the top.

Drill Expert
At The Gel Collection, we have developed our own electric nail file that exudes quality.

Drill Expert™ from The Gel Collection is an electric nail file of the highest quality. It offers infinitely adjustable speed up to 30,000 revolutions per minute, two rotation directions, a near-silent motor, and no vibrations in the handpiece. Without a doubt, it is the perfect electric nail file for both home users and professionals.

Besides its smart features, it also has the perfect size that doesn't take up too much space on the table and is easy to pack away. Additionally, 4 starter bits are included, ideal for getting started. The gripping arms are a standard size that fits most bits on the market.

  • Two rotation directions: To ensure flexibility in working with the file, it naturally has two rotation directions. It can rotate both clockwise and counterclockwise.

  • Stepless speed adjustment: Speed adjustment is an essential part of filing work. Therefore, Drill Expert™ naturally offers stepless speed adjustment, allowing you to gradually increase the speed without stepwise limitations.

  • Safety system: If the product is overloaded by too much resistance (e.g., if it gets stuck), the handpiece stops to ensure both your safety and the product's longevity.

  • No vibrations: Due to its high quality, there are no vibrations in the handpiece—even at the highest speed. This ensures a comfortable experience and avoids a challenging filing process.

  • Near-silent motor: The motor is virtually silent, ensuring the machine can be used without noise disturbances.

  • Practical holders: On the back of the machine, a holder for the handpiece is attached, making it super easy to set down the file during and after use. Additionally, there are five holes on the front of the machine, allowing easy storage of bits for quick swapping.

  • 4 Starter Bits: A small box with 4 starter bits is included, which are especially good for prepping. Additionally, the included sanding band easily removes Gel Polish.

Specifications

  • Rotation speed: Up to 30,000 rpm
  • Bit size: 3/32” (standard size for most bits)
  • Power: 35W
  • Voltage: 100V-120V/220V-240V; 50-60Hz

Which speed and bit?

In the image below, you can see an overview of the speed for our Drill Expert. These are not shown on the machine itself.

Prep:

When prepping your nails, we recommend using the lowest speeds possible, around 6,000 revolutions, to avoid damaging the natural nail.

We recommend several bits for prepping the natural nail:

Our cuticle bit - this is used around the cuticle area to remove the invisible cuticle

A mandrel bit, with a 320 grit sanding band - used to buff the natural nail and create a surface the product can adhere to. It's important to use low RPMs, as you're working directly on the natural nail, and high RPMs can generate heat when using sanding bands.

For a detailed description of prepping, you can watch our video guide here.

Filing:

When filing a nail, whether it's Builder Gel or Polygel, there are several options. Speed-wise, we recommend not exceeding 18,000 rpm to ensure you can control how much product is removed.

For general filing, you can use any ceramic bit you prefer, as long as it's an extra fine (yellow marking) or fine (red marking). You can also use our mandrel bit, with a 180 grit sanding band. The reason for using finer bits is to avoid removing too much product and only shape the nail.

Removal:

For product removal, you can use either a mandrel bit or ceramic bits. In terms of grit, we recommend the fine (red marking) or medium (blue marking) if you're using ceramic bits, and 100 or 180 grit sanding bands if you're using a mandrel bit.

Your speed should be between 18,000 - 24,000 rpm, although it's usually not necessary to go beyond 18,000 rpm.

Back to blog